Canopy Frame trial fit
Fitted the canopy frame to the fuselage.
Page 34-03
It is mainly OK
The rear part of the frame is about 10 mm too far from the roll bar. Need to hold it in place with the clumps. I guess once the canopy bubble is fitted it will stay in right place.
Something went wrong with Canopy Frame Pivot Bushing on right hand side. I probably slightly over-tighten the bolt and it expanded and jammed. Had to push it out and replace with an aluminium bushing made of 1/4″ aluminium tube (5052-0), 6.8mm long. Need to keep en eye on it